Get Support

123-456-789-10

Solar Cable – IS 17293 (with Electron Beam Irradiation Technology)

Solar Cable – IS 17293-2
solar-cable-is-17293
Enquiry Now
Brochure

Solar Cable – IS 17293 (with Electron Beam Irradiation Technology)

Application

Solar cables, also known as DC Solar or Photovoltaic cables, are used for interconnection between various elements in photovoltaic (PV) systems, including rooftop PV systems in residential or commercial buildings, PV panels/module interconnection, between panel and string box, or from string box to inverter. These are used as free-hanging, movable, or fixed installations in various indoor, outdoor, hazard explosion areas, in industries, as well as in agriculture. They are suitable for applications in equipment with protective insulations (protecting class II).

Statutory Requirement

The Quality Control Order (QCO) on DC Solar Cable, released by the Ministry of Commerce & Industry on 24th August 2023, mandates the use of DC Solar cable marked with IS 17293 in India. Any person who contravenes the provisions of this Order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016.

Standard

  • IS 17293:2020
  • RR Kabel Solar Cable marked with IS 17293 complies with IEC 62930 and exceeds the requirements of EN 50618

Technical Data

  • AC 1.0/1.0 kV
  • DC up to 2.0 kV possible
  • 0.7/1.2 kV
  • 0.9/1.8 kV
  • 250°C (referring to a period of 5 sec.)
  • -40°C to +90°C
  • Fixed Installation approx. 4 x cable Ø

Cable Construction

  • Conductor: Fine wire bunch of annealed tinned copper conductors according to IS 8130
  • Insulation: UV-resistant crosslinked Halogen-Free Flame-Retardant core insulation
  • Core Identification: Red, Black, or Natural
  • Sheath: UV-resistant crosslinked Halogen-Free Flame-Retardant sheath over insulation
  • Cable Colour: Black, Red, Black with red strip (or as required)

Properties

  • Ultraviolet (UV) resistant
  • Weather (Ozone) resistant
  • Damp-Heat resistant (tested for 1000 hours at 90°C and 85% humidity)
  • Non-toxic & Non-corrosive
  • Smoke emission is negligible & transparent
  • Excellent water resistant
  • Acid and alkali resistant
  • Ammonia resistant
  • Self-extinguishing and flame retardant according to IS 10810 part 53 & 62

Cable Design Parameters

Please complete the part numbers for these cables by adding the suffix (in place of ‘xx’) for the insulation colour required: 02 – black, 03 – red, 07 – natural.

Part Number Nominal Cross Sectional Area (Sq. mm) Nominal Insulation Thickness (mm) Nominal Sheath Thickness (mm) Approx. Cable Diameter (mm) Single Cable Free in Air (Amps) Single Cable on Surface (Amps) Two Loaded Cables Touching on Surface (Amps) Maximum DC Conductor Resistance at 20ºC (Ω/km)
12020101xx01 1.5 0.7 0.8 4.7 28 27 22 13.7
12020102xx01 2.5 0.7 0.8 5.1 38 36 30 8.21
12020103xx01 4 0.7 0.8 5.6 52 49 41 5.09
12020104xx01 6 0.7 0.8 6.2 66 63 53 3.39
12020105xx01 10 0.7 0.8 7.1 89 87 73 1.95
12020106xx01 16 0.7 0.9 8.3 120 118 97 1.24
12020107xx01 25 0.9 1.0 10.2 167 158 126 0.795
12020108xx01 35 0.9 1.1 11.5 207 196 156 0.565
12020109xx01 50 1.0 1.2 13.4 261 248 190 0.393
12020110xx01 70 1.1 1.2 15.2 329 313 245 0.277
12020111xx01 95 1.1 1.3 17.0 394 374 298 0.21
12020112xx01 120 1.2 1.3 18.7 462 440 348 0.164
12020113xx01 150 1.4 1.4 20.9 537 510 401 0.132
12020114xx01 185 1.6 1.6 23.3 611 581 460 0.108
12020115xx01 240 1.7 1.7 26.2 735 698 545 0.0817
12020116xx01 300 1.8 1.8 29.5 831 788 631 0.0654
12020117xx01 400 2.0 2.0 33.5 999 947 751 0.0495

Are You Looking For a Bulk Enquiry ?

Get A Quote